Home Networking Depot
Bonding the family dwelling through technology


JustAnswer.com

















Logo HOLLAND ELECTRONICS
Title for HOL.DPD2 Diplexer

Image HOLLAND DPD2 Diplexer


APPROVED FOR USE BY;

Logo for Dish Network product approval

FEATURES:

Combines OTA and DBS programming on to a single coaxial cable.

Signal loss i.e; Insertion Loss, less than 1.5dB on either OTA or DBS ports.

Return loss (VSWR) across entire operat
ional bandwidth. of both OTA & DBS transmission paths are low. This reduces reflections when digital signals are transported. preventing pixalization.

<40dB of band isolation is provided between the OTA & DBS utilized bandwidths.


Specifically designed for operation with DISHNET's™DP44 multiswitch's technology.

Color coded F port inserts comply with CEA (Consumer Electronics Assocation) CEA-897 specifications..



DESCRIPTION;

The HOLLAND's DPD2 allows the combining and/or separating of Off-Air / CATV signals with satellite signals to a common cable. Separates TV and satellite signals prior to satellite receiver input and filters harmonics in the off-air spectrum from satellite conversion devices. The DPD2 diplexer is specifically designed for Dish Network’s™ DP44 installations and fullfills DirecTV's, requiring for a continuous 2 amp power passing. This diplexer provides a high performance, lower insertion loss, high return loss and increased stop band isolation. The DPD2 provides a more reliable combining solution for the increased demands of the DishPro Plus installations, which may require 2 amps of current.

DPD2 DEVICE TECHNICAL PARAMETERS

Bandpass;
40-
806MHz
950-
215
0MHz
Insertion Loss;
1.5dB
1.5dB
Return Loss
>12dB
>15dB
Stop Band Rejection
<40dB
Complies with CEA-897 connector color coding
Complies with ASTMB 117-97 500 hrs Loss;

DC current capacity satelllite port - 2A(max)

DEVICE MECHANICAL PARAMETERS
mechanical drawing HOLLAND DPD2 Diplexer












2/19/2018