ASKACOMM AF-81CB Splice Barrel DC-3GHz (updated 1017)



	APPROVED BY; FEATURES: DC - 3GHz operation. Lower Insertion Loss, less than 0.3dB @ 3GHz. High return loss (VSWR) across entire operastional bandwidth. Allow reduced reflections when digital signals are transported. Solid brass adapter body with non-memory reducing beryllium copper center conductor seizing pin. Flat Greater center conductor vs seizing pin surface contact area. Providing long term trouble free signal transfer between the coaxial connector and the splice adapter. Flat adapter end ports, provides excellent mating surface for proper grounding between the F connect and the splice adapter. Flat adapter end ports, provides excellent mating surface for proper grounding between the F connector and the splice adapter.

DESCRIPTION; ASKA COMMUNICATIONS has advanced the traditional F splice technology with a patented design offering a higher level of electrical and mechanical features. The advanced features provide increased return loss beyond 3 GHz, twice the pin contact area and increased holding force for higher current handling and greater reliability. This F-81 is 15.4 / 8.6 mm. (long side/short side) allowing Feed-thru Wall-Plates and Bulk-heads up to 5/16 in. and still accommodates the F Connectors. (Note; nuts & washers for wall plate installtions are sold separately.)
AF-81CB DEVICE TECHNICAL PARAMETERS
Frequency Bandpass;	DC - 3GHz
Insertion Loss;
DC - 1.0GHz	<0.1dB
1.1 - 2.0GHz	<0.2dB
2.1 - 3.0GHz	<0.3dB
Return Loss;
DC - 1.0GHz	>35dB
1.1 - 2.0Ghz	>28dB
2.1 - 3.0GHz	>26dB
DEVICE MECHANICAL PARAMETERS
Center Conductor Retension Force
>120 grams after 50 insertion
Device overall Lenght:	27mm (1.06in) (1.06in)
Lenght of Theaded Sections:	Long 15.4mm (0.606in) Short 8.6mm (0.338in)
Hex Nut Size:	11 Hex (7/16")
Material:	Brass
Seizing Material - Center Conductor;	BeCu (barium copper)
Insulator Material	HDPR (High-density polyethylene)

12/23/2017